ДРОБИЛКА ЗА ДРОБЕНЕ НА ДЪРВО
Drum-type waste crushing machine, intended for crushing wood pieces, cellulose, waste from furniture production, пдч и т.н. Професионално решение за цех за производство на пелети с капацитет над 1 tones/h. Дробилката произвежда качествен дървен чипс с капацитет до 2 tons per hour finished size chips 5 – 10 mm and up 5 tons per hour finished size chips 30-50 mm.

The size of the chips is determined by the sieve and the feed rate of the material to the knives. The minimum distance from the rollers to the knives, allows to split wooden scraps with a length of 20 cm. At the request of the customer, the feed speed and the size of the sieve can be set when the machine is made. Четирите работни ножа позволяват на машината да дроби всякакъв вид дървесина (obla, flat, etc.) with a diameter of up to 20 см и широчина до 40 cm. This allows each customer to achieve the maximum effect of crushing and get the most suitable chip size for him.

THE CRUSHER IS ALSO SUPPLIED WITH
1. Shock system

Предназначена за предпазване от претоварване на ел. двигателя. When overloaded, the system stops feeding raw crushing material to the knives. After clearing the crushed material from the sieve, submission is restored.

2. Regulation of chip size and crushing performance

В случаите, when the customer needs different size chips, an inverter is installed to feed the material.

When changing the feed rate of raw material to the knives, the size of the chips and the crushing performance are changed. When installing this system, the customer has the opportunity to choose the size of the chips and the crushing performance. It can get lower flow rate with fuller chips and can get maximum flow rate with larger chips.